Output Register Monitor - Mitsubishi MELFA CR1D Instruction Manual

5) Press the function key corresponding to "Close", and return to the monitor menu screen.
<INPUT REGISTER>
8000 0 0×0000
8001 0 0×0000
8002 0 0×0000
8003 0 0×0000
Prev 123
NUMBER
6) Press the function key corresponding to "Close" in monitor menu screen is pressed, finish the monitor, and
return to the original screen.
<MONITOR>
1.INPUT
3.INPUT REG.
5.VARIABLE
123
◇◆◇
Finish the monitor
If the [MONITOR] key is pressed, the monitor will be finished always and it will return to the original screen.

(4) Output register monitor

If CC-Link is used, it is the function which always monitors the value of the output register.
Note） Since there is no CC-Link option in the CRnQ-700 series, this function can not be used.
1) Press the [4] key in the monitor menu screen, and display the output register screen. The output register of
the 4 registers can be monitored on the one screen.
<MONITOR>
1.INPUT
3.INPUT REG.
5.VARIABLE
123
The case where the state of the output register 8000 is confirmed is shown in the following.
CLOSE
Next
2.OUTPUT
4.OUTPUT REG.
6.ERROR LOG
CLOSE
◇◆◇
2.OUTPUT
4.OUTPUT REG.
6.ERROR LOG
CLOSE
3Explanation of operation methods
<MONITOR>
1.INPUT 2.OUTPUT
3.INPUT REG. 4.OUTPUT REG.
5.VARIABLE 6.ERROR LOG
123
<FILE/EDIT> 1/20
1 08-04-24 17:20:32
2 08-04-24 14:56:08
A1 08-04-24 13:05:54
B1 08-04-24 13:05:54
POSI. 123 NEW
EDIT
<OUTPUT REGISTER>
6000 0 0×0000
6001 0 0×0000
6002 0 0×0000
6003 0 0×0000
Prev 123
NUMBER Next
Operating the monitor screen
CLOSE
Rem 136320
22490
694
2208
1851
COPY ⇒
CLOSE
3-68