Copying Programs - Mitsubishi MELFA CR1D Instruction Manual

3Explanation of operation methods
(2)

Copying programs

1) Select the copy menu
Press the function key corresponding to the "copy" by program list display. Display the copy screen.
<FILE/EDIT>
1 08-04-24 17:20:32
2 08-04-24 14:56:08
A1 08-04-24 13:05:54
B1 08-04-24 13:05:54
POSI.
EDIT
2) Specification and execution of the program to copy.
In the parenthesis of the copied source, the program name beforehand selected by the program list screen
is displayed. (The figure the program name "1") If it changes, move the cursor by the arrow key.
Input the program name copied in the parenthesis of the copy destination, and press the [EXE] key.
<PROGRAM COPY>
SRC.NAME ( 1
DSR.NAME ( 21
◇◆◇ Protected information is not copied ◇◆◇
The program protection information and variable protection information is not copied with the copy opera-
tion.
Reset this information as necessary.
3-53 Operating the program control screen
1/20 Rem 136320
22490
694
2208
1851
123 NEW COPY ⇒
)
)
CLOSE
123
<PROGRAM COPY>
SRC.NAME ( 1
DSR.NAME (
123
<FILE/EDIT> 1/
1 08-04-24 17:20:32 22490
2 08-04-24 14:56:08
A1 08-04-24 13:05:54
B1 08-04-24 13:05:54
EDIT POSI. 123
)
)
CLOSE
20 Rem 136320
694
2208
1851
COPY ⇒
NEW