Table of Contents
Advertisement
6External input/output functions
(34) ERROUT (Error number output request/outputting error number)
* This is used together with the numeric value input (IODATA).
<Intput>
Error number output request (ERROUT)
<Output>
Outputting error number (ERROUT)
Numeric value output (IODATA)
(35) JOGENA (Jog enable input/output during jog enabled)
<Intput>
Jog enable input (JOGENA)
<Output>
Output during jog enabled (JOGENA)
(36) JOGM (Jog mode input/jog mode output)
<Intput>
Jog mode input (JOGM)
<Output>
Jog mode output (JOGM)
(37) JOG+ (Input for 8 axes on jog feed plus side)
<Intput>
8 axes on jog feed plus side (JOG+)
(38) JOG- (Input for 8 axes on jog feed minus side)
<Intput>
8 axes on jog feed minus side (JOG-)
(39) HNDCNTLn (Mechanical n hand output signal status)
<Output>
Mechanical n hand output signal status
(HNDCNTLn)
6-429 External signal timing chart
When the output request of a program number, override
value or line number was input
30 ms or more
Jog mode
(Replies the setting value of the jog mode input signal with jog mode output.)
Jog operation axis
(Specify the axis that will perform jog operation in the plus direction.)
Jog operation axis
(Specify the axis that will perform jog operation in the minus direction.)
Hand output signal status
(Indicates the output signal status of the hand.)
30 ms or more
Error number
Jog mode
Advertisement
Table of Contents
