Mitsubishi MELFA CR1D Instruction Manual page 85

5) Change the variable value.
The value of the variable currently displayed can be changed.
Move the cursor to the variable name changed by the arrow key, and press the function key corresponding
to the "Value."
Although the current value (data) is displayed, it can input and change.
<VARIABLE>
DATA M1
＋1
123
6) Press the function key corresponding to "Close", and return to the monitor menu screen.
<VARIABLE>
SLOT : 1 5
M1 =＋8
P1 =(＋595.40､＋0.00､＋829.)
C1 =
123
SLOT NAME
7) Press the function key corresponding to "Close" in monitor menu screen is pressed, finish the monitor, and
return to the original screen.
<MONITOR>
1.INPUT
3.INPUT REG.
5.VARIABLE
123
◇◆◇ The right of operation is unnecessary. ◇◆◇
It operates, even when T/B is invalid.
And, the value (data) of the variable can be changed also in automatic operation.
◇◆◇
Finish the monitor
If the [MONITOR] key is pressed, the monitor will be finished always and it will return to the original screen.
NAME
CLOSE
VALUE CLOSE
2.OUTPUT
4.OUTPUT REG.
6.ERROR LOG
CLOSE
◇◆◇
3Explanation of operation methods
<VARIABLE>
SLOT : 1 5
M1 =＋8
P1 =(＋595.40､＋0.00､＋829.)
C1 =
123
SLOT NAME VALUE
<MONITOR>
1.INPUT 2.OUTPUT
3.INPUT REG. 4.OUTPUT REG.
5.VARIABLE 6.ERROR LOG
123
<FILE/EDIT> 1/20 Rem
1 08-04-24 17:20:32
2 08-04-24 14:56:08
A1 08-04-24 13:05:54
B1 08-04-24 13:05:54
POSI. 123 NEW
EDIT
Operating the monitor screen
CLOSE
CLOSE
136320
22490
694
2208
1851
COPY ⇒
3-72