Option Screen Setup; Progedit; Change The Language Setting; Clockset - Mitsubishi a2 Series Programming Manual

Simple application controller
Table of Contents

Advertisement

α
2 Simple Application Controllers
3.6

Option Screen Setup

Various options have been provided for ease of use or for safety purposes. Please set as your
needs require. All of the options in this section can be accessed from either the Run or the
Stop Menu.
3.6.1

ProgEdit

Refer to chapter 4, Direct programming, for detailed instructions on programming the
Series Controller.
3.6.2

Change the Language Setting

1 ) Turn the
2 ) Press the "OK" and "ESC" buttons simultaneously to go to the TopMenu or reset the
controller.
3 ) Scroll to the "LANGUAGE" option and press the "OK" key. The TopMenu entry
"LANGUAGE" is common for all languages.
4 ) Scroll to the desired language and press the "OK" key. The languages available are
English, German, French, Italian, Spanish, Swedish, and Russian
5 ) Use the "ESC" key to exit to the Topmenu.
*1 Ver. 3.00 or later
3.6.3

ClockSET

To set the Clock:
1 ) From the TopMenu, scroll to "ClockSet" and press the "OK" key.
2 ) From the options that appear, choose "ClockSet" and press the "OK" key.
3 ) Use the arrow keys to move to an area that needs to be changed.
4 ) Adjust with the "+" or "-" keys.
5 ) Repeat steps 3-4 until ALL changes have been completed.
6 ) Press the "OK" key to accept all the changes or the "ESC" to discards the changes.
7 ) Press the "ESC" key to return to the Top Menu.
To set the daily correction:
1 ) From the TopMenu, scroll to "ClockSet" and press the "OK" key.
2 ) From the options that appear, choose "Correct" and press the "OK" key.
3 ) Set the daily correction time with the "+" or "-" keys.
4 ) Press the "OK" key to accept the value and press the "ESC" key to return to the Top Menu.
Caution
When setting the Real Time Clock or inputting a daily clock adjustment to the following menu
functions, please change the mode to Stop.
ClockSet in ClockSet Menu
Correct in ClockSet Menu
Note:
The date setting can be displayed as yyyy/mm/dd, dd/mm/yyyy, or mm/dd/yyyy by
manipulating the "+" and "-" keys. The day of the week will update automatically as the date is
changed.
α
2 On.
System Menu 3
*1
.
3 - 16
α
2

Advertisement

Table of Contents
loading

Table of Contents