Connect Administration Equipment; Figure 2-14. Temporary Sat And Dtu Connections - AT&T Network Adapter 25 Installation And Maintenance Manual
Adtran network adapter product manual
Hide thumbs
Also See for Network Adapter 25:
- Manual (194 pages) ,
- User manual (101 pages) ,
- User manual (62 pages)
Table of Contents
Advertisement
INSTALLATION
5.
Starting with Cabinet 2 or 3, turn on the power switch on each
cabinet [Cabinet 1 must be last).
IMPORTANT: If power to Cabinet 1 is not turned
cold start initialization may not occur properly.
6.
Check to be sure that the cabinet fans are rotating.
Connect Administration Equipment
Connect the SAT and DTU to their respective modular jacks on an 858A
Adapter at the SIP.
If the SIP has not yet been installed, connect an octopus cable to Cabinet 1,
slot 1. Make temporary connections as shown in Figure 2-14 to the SAT and
Note: The direct octopus cable connections are only temporary.
All permanent
LEGEND :
355A ADAPTER -
355AF ADAPTER -
NOTE :
LEG 1 CONNECTS TO SAT; LEG 3 CONNECTS TO DTU.
Figure 2-14. Temporary SAT and DTU Connections
2-34
connections to peripheral and station
ZTN129 -
CPU/MEMORY CP
OCTOPUS CABLE ( WP90780 )
c l -
RS-232 PLUG TO MODULAR JACK
RS-232 RECEPTACLE TO MODULAR JACK
on last, the
Advertisement
Table of Contents
