AT&T Network Adapter 25 Installation And Maintenance Manual page 335

APPENDIX E: Administration Codes and Data
NOTES:
A ? mark indicates that a yes/no
If a (No) or (Yes) is present,
response.
1) If Switched Loop Attendant
Switched L
2)
covered PDC (Action 102) for individual call coverage
This code is READ ONLY (can't be changed)
3)
4)
Direct Trunk or Switched Loop Attendant Console ONLY
5) If single-position Switched Loop Attendant Console: see Action 87
of SYSTEM menu for designating PDC of covering station
If Switched Loop Attendant Console: READ-ONLY
6)
7) Direct Trunk Attendant Console ONLY
8) Switched Loop Attendant Console ONLY
9) Requires the use of a Voice Messaging System
1 0) For DISPLAY voice terminals only
11) This feature also requires an ACTION 104 entry of "Ringer
E n a b l e " .
12) This feature also requires an ACTION 104 entry of "Ring Option".
Data = O (No Ring); 1 (Ring); or 2 (Delayed Ring).
13) This feature also requires an ACTION 104 entry of "Monitor Button
#",
14) This feature can not be used with ATL Cordless Telephone.
This feature should be used with ATL Cordless Telephone with
15)
CAUTION.
E-16
(1/0) response is required.
this indicates a strongly suggested
Console: NOT ADMINISTRABLE
p Attendant
Console cannot be specified as the
OO
November 1995