AT&T Network Adapter 25 Installation And Maintenance Manual page 396

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTION
4 0 0 1 : entry out of range
FPDC max reached
4 0 0 2 : incorrect entry
does not exist or used
improperly
4003: action number out of
sequence
do action 1 display before
FPDC removal
4005: inappropriate request
unlogged FPDC's/non-
existent CAP
4 0 0 7 : incorrect action number
can't exceed 2 if FPDC
update/display
4 0 0 8 : inappropriate request
facility not equipped
4014: at installed max -300
FPDCs
5003: incorrect entry
data out of range
5005: entry out of range
area code can't exceed 3
d i g i t s
5 0 0 6 : incorrect entry
area code digit out of
r a n g e
incorrect entry
5007:
date must be 6 digits
5010: incorrect entry
incorrect month data
5011: incorrect entry
incorrect day data
5 0 1 2 : entry out of range
hours/minutes must be 4
digits
F-18
POSSIBLE SOLUTION
Maximum FPDCs = 300
Specified FPDC not found.
Must do action 1 before removing
F P D C .
CAP not installed even through flag
is set to send FPDCs not logged in
t h e r e .
Action invalid for FPDC update or
display.
Facility unequipped for FPDC
d i s p l a y .
Maximum FPDCs = 300
Number of seconds after last digit
dialed to commence billing is
invalid.
NPA cannot exceed 3 digits.
Area Code= NPA where N=2-9,
P=0-l, and A=1-9.
Date must be in the form
( M M D D Y Y ) .
Date = MMDDYY where MM=01 -
12, DD=01 -31, and YY=00-99.
Day = HHMM where HH=00-23,
MM=00-59
Hours/minutes = HHMM (4 digits
exactly)