AT&T Network Adapter 25 Installation And Maintenance Manual page 380

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTION
1006: incorrect entry
port-on-board number out be a number from 1 to 8 (varies on
of range
1 0 0 7 : incorrect action number
can 't exceed 1 with
unequipped facility
1008: incorrect entry
port-on-board number out maximum port number on the
of range
1 0 0 9 : incorrect entry
number must be 5 digits
1010: incorrect facility type
does not exist or used
improperly
1 0 1 1 : inappropriate request
FPDC already exists
1012: incorrect PDC
does not exist or used
improperly
1 0 1 3 : inappropriate request
slot not equipped
1014: inappropriate request
must be station
1 0 1 5 : inappropriate request
can't move CAP port
1016: incorrect action number
must be 0-2
F-2
POSSIBLE SOLUTION
Cabinet-Slot-Port (CSSPP) PP must
different circuit packs)
Must administer ACTION = 1 before
proceeding.
The entered port is greater than
associated board.
Number must be 5 digits. Nonspecial
port does not have 5 digits.
The facility type is not valid for this
system.
Go to MENU 5 (FPDC)
ACTION = 1
Hit c to continue to list FPDCs.
FPDC could be not assigned.
The entered number is valid but is not
a station or data port.
Port type has to be administered
before proceeding.
Must be a station supported by
System 25. See Voice Terminal Type
Codes in Administration Manual. Can
only move port associated with
station.
Can not move the port associated
with the CAP.
Item numbers must be 0-2 at this
p o i n t .