AT&T Network Adapter 25 Installation And Maintenance Manual page 400

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTION
7 0 2 3 : incorrect entry
data can't exceed 1
7026: incorrect PDC
must be station or data
port
7 0 2 7 : incorrect entry
can't be 0 or exceed 5
digits
7030: incorrect entry
leading zeros not allowed processing item 2 for paging zone
7 0 3 1 : out of space
no more room to add
7 0 3 2 : incorrect PDC
this zone & all zone
PDC's do not agree
7 0 3 4 : action number out of
s e q u e n c e
must enter 2 first
7 0 3 5 : inappropriate request
paging zone not
e q u i p p e d
incorrect button number
7036:
station button already
exists
POSSIBLE SOLUTION
Data value cannot exceed 1.
Must be station or data port.
Entry cannot be 0 or exceed 5
digits.
Leading 0 was found while
a d d .
Not enough room for adding new
paging zones.
Entered numbers for this zone and
all zone is ambiguous.
Must assign a paging zone before
trying to administer all zone paging.
The paging zone is equipped;
therefore the restriction flag is
unknown.
Button on station is previously
assigned.