Appendix E: Administration Codes And Data - AT&T Network Adapter 25 Installation And Maintenance Manual

APPENDIX E: Administration Codes and Data

Table E-B. PORT/PD. Administration, Voice Terminals (Menu=1/2)
ACTION
Physical port number
0
Enter terminal type code
1
2 Enter PD.
Restrict dial access to CC) trunk pool
3
Restrict dial access to all other trunk
4
pools
Assign ringing line preference*
5
Assign prime line preference*
6
Assign call coverage receiver group†
7
8 Assign call coverage ring on no answer†
Assign call coverage ring on busy†
9
10 Make this an extended station‡
Assign a group pickup number
11
PD. of station to hunt to next
12
Assign toll restriction class
14
Assign ARS Facility Restriction Level
15
Enable personal speed dialing
16
* Read-only feature for SLAC.
** Note: The TN746 (Analog Line) has to be installed per Menu 3 first.
† Not administrable for SLAC. For Action 9 for AUDIX Voice Power, set Data =
0 (no) for Merlin telephones, set Data = 1 (yes) for single-line telephones.
‡ Action 10 cannot be used for the TN746B. Refer to the fallowing information
when administering extended stations on the TN746B.
E-2
DESCRIPTlON
DATA
CSSPP**
[See Table E-C]
[1 -9999]
[1=Y/0=N]
[1=Y/0=N]
[l=Y/0=N]
[Button Number, 7]
[1 -32,0 for none, or
101-132 DGC receiver
group, SLAC default is
0 for none]
[1=Y/0=N, SLAC
default is O for none]
[1=Y/0=N, SLAC
default is 0 for none]
[1=Y/0=N]
[1-1 6; 0 for none]
[PD.; 0 for none]
[1-5; 0 for none]
[0-3; 3]
[1=Y/0=N]
November 1995