AT&T Network Adapter 25 Installation And Maintenance Manual page 387

ERROR MESSAGE
AND DESCRIPTION
1094:
inappropriate request
only DISPLAY of SLC-
CAP status allowed
1 0 9 5 : action number
out of sequence
must enter 90 &/or 91
first
1096: entry out of range
data must be 1-7
1097: entry out of range
data must be 1-8
1098: entry out of range
data must be 0-2
1099: incorrect entry
too many characters
2 0 0 0 : incorrect action number
can't exceed 3 digits
2 0 0 1 : inappropriate request
must be data port
2002: inappropriate request
must be station or data
p o r t
APPENDIX F: Administration Error Messages
POSSIBLE SOLUTION
Display attendant position
DTAC/SLAC. See:
MENU = 1 (Port)
ACTION = 60
for more information.
Check MENU 4 (System
Administration) for administering
correct sequence.
Call type priority must be between
1-7. Check MENU 4 Action item 92.
Call type code must be between 1-
8. Check MENU 4 Action item 91
Denotes att. that should receive
calls from this trunk.
NOTE: Data range must be between
0-2 not 1-3. See:
MENU = 1 (Port)
UNDER TRUNKS
ACTION = 12
for more information.
Must be <= 11 printable ASCII
characters.
4-digit number not supported.
Must be data port for Action 22 to
be legal. See:
MENU = 1 (Port)
UNDER DATA PORT
ACTION = 22
for more information.
Trying to administer a feature that is
not related to a station or data port.
Button number invalid (button
numbers <9 are already
programmed or system access.)
F-9