AT&T Network Adapter 25 Installation And Maintenance Manual page 391

ERROR MESSAGE
AND DESCRIPTION
2 0 5 3 : incorrect entry
incorrect area code office where N=2-9, P=0-l ,and A=l -9.
c o d e
2 0 5 4 : incorrect entry
data must be 0-2
2 0 5 5 : inappropriate request
office code found in wrong l i s t .
l i s t
incorrect entry
2056:
area code does not exist
2 0 5 7 : incorrect entry
incorrect area code office not found in table) There are no office
c o d e
action number out of
2060:
sequence
improper procedure
2062: entry out of range
number out of range
2063: incorrect entry
number can't be 0
2 0 6 6 : incorrect facility type
must be station type
Invalid data, SLC
2 0 6 7
reprioritization 0-30 sec.
2068: incorrect PDC
station can't have 0
2 0 7 1 : out of space
no more groups available (UPNs) available.
2 0 7 2 : action number out of
r a n g e
does not exist or used
improperly
2 0 7 3 : incorrect entry
list reference out of range
APPENDIX F: Administration Error Messages
POSSIBLE SOLUTION
Area Code = NPA
Office Code = NXX where N=2-9,
X = 0 - 9
Invalid area code or office code for
Toll Calls Allowed.
Data entry must be 0-2.
Found office code but not in proper
Area Code does not exist in the NPA
(no such area code found in table).
Specified office code pattern and list
codes for the given list under the area
c o d e .
Check the Administration Manual for
correct ACTION sequence.
Call Coverage Group out of range -
too high.
Call Coverage Group zero not
allowed.
Port not a station
Number entered not in allowable
range of time.
Zero not allowed for station PDC.
No more Universal Port Numbers
Check Admin. manual for correct
ACTION number/sequence.
LIST 'target' is out of range.
F-13