AT&T Network Adapter 25 Installation And Maintenance Manual page 403

ERROR MESSAGE
AND DESCRIPTION
7 0 5 4 : out of space
no more room in digit
p o o l
7 2 0 0 : entry out of range
RS232 value out of range Target value should be 1-4. See:
7 2 0 2 : inappropriate request
improper procedure
7203: incorrect entry
logical channel out of
r a n g e
7204: incorrect entry
return delay out of range
incorrect entry
7206:
incorrect baud rate
7 3 0 0 : incorrect action number
data must be 1,2,3,10 or
2 0
7 3 0 2 : inappropriate request
can't update translation -
tape lockout
7 4 0 0 : incorrect entry
data must be 1 or 4 only
NOTE: Above is
statement is wrong.
data must be 2 or 3 only
APPENDIX F: Administration Error Messages
POSSIBLE SOLUTION
System speed digit pool is full.
Invalid TARGET value specification.
MENU = 10 (RS232)
ACTION = 0 under MENU = 10
(RS232) is invalid.
MENU = 10 (RS232) ACTION = 1
DATA = must be 1-4 (anything else
is invalid.)
MENU = 10 (RS232) ACTION = 2
DATA = must be 0-2
MENU = 10 (RS232) ACTION = 3
DATA = baud rates must be 300,
1200, 4800, 9600.
Legal baud rates for Administration
and Maintenance are 1200, 4800,
9600. Legal baud rate for SMDR is
1200. Legal baud rate for Tape is
1 2 0 0 .
Under Save/Restore, MENU = 9
Action values must be 1,2,3,10, or
2 0 .
Cannot administer system during
tape backup.
MENU = 10 (RS-232) TARGET = 3
ACTION = 1 DATA = 2 or 3
SMDR output can come out of the
tape port.
F-25