TEST DICTATION SYSTEM ACCESS
Place a call to verify that dictation equipment can be accessed. If dictation
equipment has not been installed, this feature cannot be tested.
1.
Use a working voice terminal as the test terminal, and go off-hook.
2.
Dial the access code or PDC, and the number associated with the
dictation equipment.
Verify that ready or talkdown tone is transmitted.
3.
4.
Transmission in
and play it back
5.
Go on-hook.
TEST PAGING INTERFACE
Place a test call to each paging zone to verify that paging equipment can be
accessed.
Note:
If testing ZoneMate 9 (used with PagePac 20), get an
acknowledge tone. Then dial the zone code, and make an
announcement.
1.
A t
any working voice terminal, go off-hook and dial the access code
PDC for a particular zone.
or
You may hear a confirmation tone.
2.
Make an announcement into the handset.
— You should hear the announcement
3.
At the calling voice terminal, go on-hook.
4.
Repeat Steps 1 through 3 for all paging zones provided.
both direction should be tested. Make a recording
SYSTEM TESTS
from the loudspeaker(s).
3-13