AT&T Network Adapter 25 Installation And Maintenance Manual page 184

MAINTENANCE
Administration Requirements
For a RIMS call to be made during initialization, at least one voice station and
one trunk must be translated. A cold start with defaults provides these
translations.
The RIMS transfer code (*1 00) can be assigned to a Repertory Dialing feature
button on a multiline voice terminal. If the Remote Access feature is used,
the trunk used for RIMS access must be administered as a remote access
t r u n k .
Hardware Requirements
C u s t o m e r ' s S i t e :
N o n e .
.
Remote Location:
A dumb terminal equipped with a modem that supports voice transfer to data
and an RS-232C connecting cable is required. An AT&T PC 6300 replaces
the terminal if the Advanced Installation Tool (AIT) software is used.
4-8