Table E-K. Port/Pdc Administration, Data Terminals (Menu=1/2 - AT&T Network Adapter 25 Installation And Maintenance Manual

Table E-K. PORT/PDC Administration, Data Terminals (Menu=12)
ACTION
0 Physical port number
1 Enter data type code
2 Enter D D C
Restrict dial access to CO trunk pool†
3
Restrict dial access to all other trunk
4
pools†
12 DDC of station to hunt to next
Restrict this station
13
o u t w a r d c a l l s †
14 Assign toll restriction class†
15 Assign ARS Facility Restriction Level†
21 Enter associated voice/data endpoint
s t a t i o n *
22 Restrict Third-Party Call Set-Up so user
c a n o n l y establish calls for the
associated station (see Action 21)†
Auto-adjust
61
origination.* (The default is 0 for
STARLAN CP.)
Allow terminal to operate at low bits
62
per second (bps)*
Allow terminal to operate at a baud rate
63
of 300 bps*
Allow terminal to operate at a baud rate
64
of 1200 bps*
Allow terminal to operate at a baud rate
65
of 2400 bps*
Allow terminal to operate at a baud rate
66
of 4800 bps*
† If data port type code 1802 (STARLAN CP), default values are relevant for the first installed port
on the board. Values assigned to this action item on
four ports on this board.
‡ Not administrable for STARLAN CP.
Read-only for STARLAN CP.
APPENDIX E: Administration Codes and Data
DESCRIPTlON
from making
baud rate on
any
DATA
C S S P P
[See Table E-K]
[1 -9999; 600-704]
[1=Y/0=N]
[1=Y/0=N]
[PDC; 0 for none]
[1=Y/0=N]
[1-4; 0 for none]
[0-3; 3]
[PDC/DDC or
0 for none]
[1=Y/0=N]
[1=Y/0=N]
c a l l
[1=Y/0=N]
[1=Y/0=N]
[1=Y/0=N]
[1=Y/0=N]
[1=Y/0=N]
of the four ports will be copied to
I
all
E-23