AT&T Network Adapter 25 Installation And Maintenance Manual page 395

ERROR MESSAGE
AND DESCRIPTION
3 0 1 5 : at installed max
-pool groups
3016: entry out of range
access code must be 1
d i g i t
3 0 1 7 : entry out of range
access code can't exceed entered for trunk pool dial access of
1
3018:
inappropriate request
only display of hunt
position allowed
3 0 1 9 : incorrect entry
DGC group number out
o f r a n g e
3021: inappropriate request
DID trunk can't have
night service
inappropriate request
3024:
tie trunks not allowed
announcement
3 0 2 5 : inappropriate request
announcement must be
0 - 2
3026: inappropriate request
announcement machine delay announcement machine group
not installed
3027:
inappropriate request
trunk has dependent
b u t t o n s
4 0 0 0 : incorrect action number
must be 0-5.
APPENDIX F: Administration Error Messages
I
POSSIBLE SOLUTION
Can install 16 trunk group
m a x i m u m .
Only 1 digit can be entered for the
trunk pool dial access information.
The maximum value that can be
1.
The hunting position of a trunk in
pool cannot be updated manually.
Can have 32 DGC groups with 20
members per group. The entered
number is not in the range of
allowed DGC groups.
DID trunks are not assignable to
N S .
Cannot administer announcement
for TIE trunks.
The entered value is not a delay
announcement group number.
The entered flexible night service
does not have an announcement
machine installed.
Trunk cannot be removed until the
personal trunk buttons pointing to it
are untranslated.
I
Recheck Action value taken.
F-17