Install Starlan Network Interface - AT&T Network Adapter 25 Installation And Maintenance Manual

INSTALLATION

INSTALL STARLAN NETWORK INTERFACE

Note: Support for the STARLAN Interface has been discontinued.
The ZTN84 STARLAN Interface CP provides an interface between the
System 25 TDM bus and a STARLAN NETWORK local area network (LAN).
An octopus cable connects the ZTN84 CP to a Network
on the STARLAN NETWORK (Figure 2-49).
1. Select the cable label sheet (Figure 2-7) that
(blue for #l, orange for #2, and green for #3).
2. On an octopus cable, attach an appropriate label (CAB1 SLOT8, for
example) on the last flag-type cable tie and on the back of the hood
of the 25-pair connector.
3. Connect the 25-pair
ZTN84 receptacle on
4.
Connect the modular
IN jack.
LEGEND:
Figure 2-49.
2-112
connector end of the octopus cable to the
plug on leg 1 of the octopus cable to an NEU
ZTN84 - STARLAN INTERFACE CP
C1 - OCTOPUS CABLE ( WP90780 )
NEU - NETWORK EXPANSION UNIT
ZTN84 STARLAN Interface CP Connection
Extension Unit (NEU)
identifies the cabinet