Octopus Cables; Adapter Cable; Ds1 Connector Cables; Figure 2-6A. 853B Adapter Cable - AT&T Network Adapter 25 Installation And Maintenance Manual

INSTALLATION

Octopus Cables

Octopus cables (Figure 2-6) connect the station port and CPU/Memory circuit
packs to the SIP adapters. Each cable consists of a 25-pair male connector that
connects to the switch cabinet and eight modular plugs that connect to the SIP
adapters. These cables are provided with all system cabinets.

8536 Adapter Cable

The 853B Adapter Cable (104305834) connects two octopus cables to a 16-port
TN746B Analog Line circuit pack. As shown on Figure 2-6a, each cable consists
of one 25-pair male connector (Connector O) and two 25-pair female connectors
(Connectors 1 and 2). The cable length is eight feet.
CONNECTOR 1
CONNECTOR 2
Connector Cables
DS1
The following Connector cables are available to connect the DS1 Interface circuit
packs to DS1 digital facilities:
H600 307, G2—50-foot long shielded cable equipped with a 50-pin male
connector on one end and unterminated at the other end. The cable
may be cut to length. Shipped loose are a KS23007, L1 15-pin male
2-12
Octopus Cable
Figure 2-6.

Figure 2-6a. 853B Adapter Cable

CONNECTOR O