Test Single-Line Voice Terminals - AT&T Network Adapter 25 Installation And Maintenance Manual
Adtran network adapter product manual
Hide thumbs
Also See for Network Adapter 25:
- Manual (194 pages) ,
- User manual (101 pages) ,
- User manual (42 pages)
Table of Contents
Advertisement
TEST SINGLE-LINE VOICE TERMINALS
Test each single-line voice terminal by placing station-to-station and external
calls.
1.
At the test terminal, go off-hook.
— You should hear system dial tone.
2.
Dial the PDC of another working terminal.
You should hear ringback at the calling terminal and ringing
at the called terminal.
At
3.
the called voice terminal, go off-hook and verify transmission.
4.
At
both voice terminals, go on-hook.
5.
A t
the test terminal, go off-hook.
You should hear
6.
Dial the
CO trunk access
You should hear
7.
Dial the
listed directory number for the system you are installing.
You should hear ringback at the calling terminal and ringing
at the attendant position.
8.
Go off-hook at the attendant position, and verify transmission.
9.
At the calling terminal and attendant position, go on-hook.
10.
If the station is toll restricted, place a toll call.
— You should hear reorder tone.
11.
If any terminal feature is not working properly, verify the translations
at the SAT.
system dial tone.
code.
CO dial tone.
SYSTEM TESTS
Advertisement
Table of Contents
