Connection To Ztn76 Or Ztn77 Cp - AT&T Network Adapter 25 Installation And Maintenance Manual
Adtran network adapter product manual
Hide thumbs
Also See for Network Adapter 25:
- Manual (194 pages) ,
- User manual (101 pages) ,
- User manual (82 pages)
Table of Contents
Advertisement
INSTALLATION
Connection to ZTN76 or ZTN77 CP
PagePac 20 system with ZoneMate 9/39 and Common Control Unit (CCU)
provides up to nine/thirty-nine paging zones and multizone groups.
To connect a PagePac 20 system, make connections using the following
steps (Figure 2-58):
1.
Place the PagePac amplifier on the ZoneMate and the CCU.
2.
Connect the three units as follows:
Plug the cord attached to the CCU into the modular jack on
a .
the PagePac system.
b. Connect the 25-pin cable between the ZoneMate and the
C C U .
Plug GR Molex connector from CCU into PagePac 20.
c .
3.
Using a D4BU modular cord connect the jack on the back of the
CCU to the 103A connecting block.
4.
Using 4-pair inside wiring cable, connect the 103A connecting block
to the TAE 700A block. Make the following connections:
5.
Attach the speakers to the ZoneMate.
6.
Set the switch on the CCU to LS for loop-start trunks or GS for
ground-start trunks.
7.
For ground start trunks, connect the black lead from the 2-pair cord
supplied with PagePac 20 to the System 25 cabinet ground block.
2-128
700A Block Term.
103A Term.
T
R
1
2
Advertisement
Table of Contents
