Cold and warm starts both display the same type of information on the SAT. This
consists of a listing of the version of the firmware loaded in the CPU/Memory
CP, followed by a configuration listing of all CPs recognized by the system. The
CPU/Memory CP is not in the configuration listing; however, it is located in slot 1
of Cabinet 1.
Table 2-C provides a listing of SAT messages
cool or warm start. The displayed message is
and port translations.
Table 2-C. Displayed SAT Messages During Cold or Warm Restart
Circuit Pack (CP)
in Slot
No
Yes
Yes
Yes
Yes (Unsupported
CP Type)
† Warm restart only.
# Mark indicating that the CP is unused.
* Mark indicating that the CP is mismatched.
November 1995
that may be displayed during a
a result of CP occupancy, type,
Port Translated
Yes
No
Yes
Yes (doesn't match
physical CP)
Yes or No
INSTALLATION
Displayed
Message
†
Missing
CP Type Listed #
CP Type Listed
CP Type Listed*
Illegal
2-37