Tray roller catch assembly removal
1
Remove the media tray catch spring. Go to
2
Remove the tray roller catch assembly from the drawer.
Tray roller catch assembly removal
1
Remove the media tray catch spring. Go to
2
Remove the tray roller catch assembly from the drawer.
Upper interface cable assembly removal
1
Remove the 550-sheet frame assembly. Go to
2
Disconnect the upper interface cable connector (A) from the 550-sheet controller card.
"Media tray catch spring removal" on page
"Media tray catch spring removal" on page
"Media size actuator removal" on page
Repair information
419
4062
412.
414.
414.