Configuring Access To Junos Space Through A Nat Gateway - Juniper JA2500 Hardware Manual

Configuring Access to Junos Space Through a NAT Gateway

Copyright © 2018, Juniper Networks, Inc.
The Junos Space Settings Menu is displayed.
CAUTION:
settings, then all the settings are discarded.
(Optional) If you have applied the settings, then type Q to exit the Junos Space
j.
Settings menu.
You are taken to the console login prompt.
NOTE:
If you have specified that the Junos Space node is the first node in the fabric
or a standalone node, you can access Junos Space Network Management
Platform by typing the IP address configured for the Web GUI in a browser.
If you have specified that the Junos Space node is part of an existing cluster
(fabric), then you must add the Junos Space node to the Junos Space fabric
using the Junos Space Network Management Web GUI. For more
information, see the Adding a Node to an Existing Junos Space Fabric topic
in the Junos Space Network Management Platform Workspaces Feature
Guide (available at
http:/ /www.juniper.net/techpubs/en_US/release-independent/junos-space/index.html
You can choose to configure access to Junos Space through a NAT gateway when you
are configuring a Junos Space appliance.
When prompted, specify whether you want to configure access to Junos Space using
NAT.
Do you want to enable NAT service ? [Y/N]
To configure NAT, type Y.
Chapter 13: Performing Initial Configuration
If you quit the configuration without applying the
).
107