Replacing The Ac Power Supply Cord On A Junos Space Appliance; Disconnecting The Ac Power Supply Cord; Connecting The Ac Power Supply Cord - Juniper JA2500 Hardware Manual

Junos space appliance hardware guide
Hide thumbs Also See for JA2500:
Table of Contents

Advertisement

Juniper Networks JA2500 Junos Space Appliance Hardware Guide
Related
Documentation

Replacing the AC Power Supply Cord on a Junos Space Appliance

Disconnecting the AC Power Supply Cord

Connecting the AC Power Supply Cord

152
Replacing the Fan on a Junos Space Appliance on page 161
Replacing the Hard Disk on a JA2500 Junos Space Appliance on page 163
AC Power Supply in Junos Space Appliances on page 24
DC Power Supply in Junos Space Appliances on page 26
Field-Replaceable Units on the JA2500 Junos Space Appliance on page 4
NOTE:
If only one power supply module is installed in your Junos Space
Appliance, you must power off the appliance before replacing the power
supply cord.
This topic contains the following sections:
Disconnecting the AC Power Supply Cord on page 152
Connecting the AC Power Supply Cord on page 152
To disconnect an AC power supply cord from a Junos Space Appliance, do the following:
(Optional) Attach an electrostatic discharge (ESD) grounding strap to your bare wrist,
1.
and connect the strap to an external ESD point.
If the AC power source outlet has a power switch, set it to the OFF position. If the AC
2.
power source outlet does not have a power switch, gently pull out the male end of
the power cord connected to the power source outlet.
If the power cord has the retainer clip and adjustment nut installed, turn the adjustment
3.
nut so that the power cord can be removed from the slot in the adjustment nut.
Unplug the power cord from the power supply module.
4.
To connect an AC power supply cord to a Junos Space Appliance, do the following:
(Optional) Attach an electrostatic discharge (ESD) grounding strap to your bare wrist,
1.
and connect the strap to an external ESD point.
If the power cord retainer clip is not installed on the power supply module, squeeze
2.
the two sides of the power cord retainer clip and insert the L-shaped ends of the wire
Copyright © 2018, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos space ja1500

Table of Contents