Figure 9: Midmoounting In A Two-Post Rack - Juniper JA2500 Hardware Manual

Juniper Networks JA2500 Junos Space Appliance Hardware Guide
Related
Documentation
82
To mount the appliance in a two-post rack, do the following:
Remove the two front-mount rails from either side of the chassis.
1.
Insert one midmount bracket to the center on either side of the chassis.
2.
Attach the chassis to the equipment rack and insert the other two midmount brackets
3.
on either side of the appliance to secure the chassis to the backs of the post, as shown
in Figure 9 on page 82.

Figure 9: Midmoounting in a Two-Post Rack

Verify that the mounting screws on one side of the rack are aligned with the mounting
4.
screws on the opposite side and that the appliance is level.
Front-and-Rear Mounting the JA2500 Junos Space Appliance Flush to a Rack on
page 79
Front-and-Rear Mounting the JA2500 Junos Space Appliance Recessed in a Rack on
page 80
Junos Space Appliance Rack Requirements on page 21
Tools and Parts Required to Install the Junos Space Appliance on page 77
Copyright © 2018, Juniper Networks, Inc.