Mounting The Ja2500 Junos Space Appliance; Rack - Juniper JA2500 Hardware Manual

Related
Documentation

Mounting the JA2500 Junos Space Appliance

Related
Documentation
Front-and-Rear Mounting the JA2500 Junos Space Appliance Flush to a Rack
Copyright © 2018, Juniper Networks, Inc.
Table 18: Items in the JA2500 Appliance Shipping Carton (continued)
Component
Mounting kits
RJ–45 to DB–9F cable with adapter, 7 ft console cable
7-ft, blue, Category 5e cable
Safety Information Reference for Hardware Platforms
Junos Space Appliance Rack Requirements on page 21
Mounting the JA2500 Junos Space Appliance on page 79
Tools and Parts Required to Install the Junos Space Appliance on page 77
You can mount the JA2500 Junos Space Appliance in one of the following ways:
Front and rear flush to a rack—Refer to the
Junos Space Appliance Flush to a Rack" on page 79
Front and rear recessed in a rack—Refer to the
Junos Space Appliance Recessed in a Rack" on page 80
Midmounted in a two-post rack—Refer to the
in a Two-Post Rack" on page 81
Junos Space Appliance Rack Requirements on page 21
Tools and Parts Required to Install the Junos Space Appliance on page 77
This mounting option is used for larger chassis that require additional support when
mounted on the rack-mount system.
To mount the JA2500 appliance front and rear flush to a rack, do the following:
Insert four rack-mount screws on each side of the appliance to secure the front of the
1.
chassis to the equipment rack.
Slide the rear-mount rail brackets into the backs of the front rails on either side of the
2.
chassis and align with your rear equipment rack posts, as shown in
Chapter 11: Installing the Appliance
"Front-and-Rear Mounting the JA2500
topic for details.
"Front-and-Rear Mounting the JA2500
topic for details.
"Midmounting the Junos Space Appliance
topic for details.
Quantity
2
1
2
1
Figure 7 on page 80.
79