Changing Firewall And Ssh Settings; Accessing The Shell - Juniper JA2500 Hardware Manual

Juniper Networks JA2500 Junos Space Appliance Hardware Guide

Changing Firewall and SSH Settings

Accessing the Shell

146
To retrieve system log files, do the following:
On the Junos Space Settings Menu, type
1.
On the subsequent menu, you can do the following:
2.
To save the log files to a USB device, type
Junos Space Network Management Platform retrieves the log files on all cluster
(fabric) nodes and combines the log files into a tar file. After the file is created, you
can copy the file onto a USB device.
Alternatively, to transfer the log files using SCP, type
the CLI.
Junos Space Network Management Platform retrieves the log files on all cluster
(fabric) nodes and combines the log files into a tar file. After the file is created, you
can transfer the file to a remote server.
Type to apply all the changes that you made, or type
A
3.
Settings Menu without applying the changes.
By default, the firewall and SSH are enabled on the Junos Space Appliance.
To change the firewall and SSH settings, do the following:
On the Junos Space Settings Menu, type
1.
(Optional) To change the firewall setting:
2.
If the firewall is currently enabled, type
If the firewall is currently disabled, type
(Optional) To change the SSH setting:
3.
If SSH is currently enabled, type
If SSH is currently disabled, type
Type to apply all the changes that you made, or type
4. A
Settings Menu without applying the changes.
You can access a shell and run shell commands that can help during debugging. Do the
following:
On the Junos Space Settings Menu, type
1.
You are prompted to enter a password.
Type the password for the administrator (admin user).
2.
at the prompt.
4
and follow the prompts on the CLI.
1
and follow the prompts on
2
to return to the Junos Space
M
5 at the prompt.
to disable the firewall.
1
to enable the firewall.
1
to disable SSH.
2
2 to enable SSH.
to return to the Junos Space
M
at the prompt.
6
Copyright © 2018, Juniper Networks, Inc.