Changing The Password For The Default User - Juniper JA2500 Hardware Manual

Juniper Networks JA2500 Junos Space Appliance Hardware Guide

Changing the Password for the Default User

140
3> Change Time Options
4> Retrieve Logs
5> Security
6> (Debug) run shell
A> Apply changes
Q> Quit
R> Redraw Menu
Choice [1-6,QR]:
NOTE: Password changes take effect immediately. Any other changes that
you make to the settings do not take effect until you apply the changes. You
can apply the changes from the Junos Space Settings Menu or any sub-menu
by typing at the prompt. Irrespective of the menu or sub-menu that you are
A
in when you apply changes, all changes to the appliance settings are applied.
This topic includes the following sections:
Changing the Password for the Default User on page 140
Changing Network Settings on page 141
Modifying the IP Address of the eth1 Interface on page 144
Changing the Time Zone and NTP Servers on page 145
Retrieving and Transferring System Log Files on page 145
Changing Firewall and SSH Settings on page 146
Accessing the Shell on page 146
Applying or Cancelling Changes to Settings on page 147
You can change the password for the default user (admin) for the Junos Space Appliance.
To change the password, do the following:
On the Junos Space Settings Menu, type
1.
Type when you are prompted to change the password for the admin user.
y
2.
Type the current password and press Enter.
3.
at the prompt.
1
Copyright © 2018, Juniper Networks, Inc.