Monitoring The Power Supply In A Junos Space Appliance - Juniper JA2500 Hardware Manual

Related
Documentation

Monitoring the Power Supply in a Junos Space Appliance

Purpose
Copyright © 2018, Juniper Networks, Inc.
Maintaining the Junos Space Appliance on page 167
Monitoring the Power Supply in a Junos Space Appliance on page 175
Monitoring the RAID Array for the JA2500 Junos Space Appliance on page 177
For optimal performance of the Junos Space appliance, verify the condition of the power
supply module or modules installed in the appliance.
NOTE: Routinely check the LED on the power supply module. The Power
Supply Module LED is green when the power supply module is powering the
appliance, and amber when the power supply module is on but not powering
the appliance (standby mode). If there is a problem with the power supply
module, the Hardware Fault LED, located on the front panel of the appliance,
starts blinking and an alarm sounds.
For information on how to replace an AC power supply module, see
the AC Power Supply Module on a Junos Space Appliance" on page
information on how to replace a DC power supply module, see
the DC Power Supply Module on a Junos Space Appliance" on page
Chapter 18: Monitoring the Appliance
"Replacing
154. For
"Replacing
158.
175