Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
Figure 14: Ethernet Cable Connector
To connect the appliance to a management console, do the following:
Connect the RJ-45 to DB-9 serial port adapter to the serial port of the management
1.
device (laptop or PC) that you will use to access the Junos Space CLI.
NOTE:
If your laptop or PC does not have a DB-9 male connector pin and
you want to connect your laptop or PC directly to the appliance, use a
combination of the RJ-45 to DB-9 female adapter supplied with the
appliance and a USB to DB-9 male adapter. You must provide the USB
to DB-9 male adapter.
Connect one end of the Ethernet cable into the console port (labeled
2.
the front panel of the appliance.
Connect the other end of the Ethernet cable into the RJ-45 to DB-9 serial port adapter.
3.
Connecting a Junos Space Appliance to the Network on page 87
Booting the Junos Space Appliance on page 91
Chassis Console Port Pinouts on page 14
Chapter 12: Connecting the Appliance
CONSOLE
) on
89