Table of Contents
Advertisement
3. Log in as root. There is no password. If the software booted before you connected to the console port,
you might need to press the Enter key for the prompt to appear.
Amnesiac <ttyd0>
login: root
4. Start the CLI.
root@% cli
5. Enter configuration mode.
root> configure
Establish a Root Password and an Optional Hostname
1. Add a password to the root administration user account.
[edit]
root@# set system root-authentication plain-text-password
New password: password
Retype new password: password
2. (Optional) Configure the name of the router. If the name includes spaces, enclose the name in quotation
marks (" ").
[edit]
root@# set system host-name host-name
Configure the Default Gateway and Ethernet Interface
1. Configure the default gateway.
[edit]
root@# set system management-instance
root@# set routing-instances mgmt_junos routing-options static route prefix/prefix-length next-hop
default-gateway-ip-address
156
Advertisement
Table of Contents
