Rack; Figure 7: Front-And-Rear Mounting Flush To A Rack - Juniper JA2500 Hardware Manual

Juniper Networks JA2500 Junos Space Appliance Hardware Guide
Related
Documentation
Front-and-Rear Mounting the JA2500 Junos Space Appliance Recessed in a Rack
80
Secure the rear-mount rail brackets to your equipment rack with two rack-mount
3.
screws each.
Insert locking screws on the sides of the rear-mount brackets to secure the front and
4.
rear mounting brackets in place.

Figure 7: Front-and-Rear Mounting Flush to a Rack

Verify that the mounting screws on one side of the rack are aligned with the mounting
5.
screws on the opposite side and that the appliance is level.
Front-and-Rear Mounting the JA2500 Junos Space Appliance Recessed in a Rack on
page 80
Junos Space Appliance Rack Requirements on page 21
Midmounting the Junos Space Appliance in a Two-Post Rack on page 81
Tools and Parts Required to Install the Junos Space Appliance on page 77
This mounting option provides additional front clearance in the equipment rack. It is used
for a larger chassis that requires additional support when mounted on the rack-mount
system.
To mount the JA2500 appliance front and rear recessed in a rack, do the following:
Remove the rear screws on each side of the appliance's front rails and the two small
1.
screws toward the front of the chassis.
Loosen the side-rail screws of the chassis and slide the front rails of the system
2.
backward, as far as they will move.
Tighten the side-rail screws.
3.
Copyright © 2018, Juniper Networks, Inc.