GE CARESCAPE ONE User Manual page 361

CARESCAPE ONE User Manual DRAFT 26 October 2017
Setting
Smart BP
Enable the Smart BP
algorithm.
IABP On
Enable the IABP
program.
Primary Arterial Select the primary
Source arterial source.
Select Monitor Setup > Main Setup > Parameter Setup > Page 1 > Art 1 > Alarms > Art 1
Alarms to adjust these settings for the current patient. The following table lists the factory
default settings.
Setting
Systolic alarm limits Select the high/low
alarm limits.
Systolic alarms on Enable alarm when
limits are violated.
Mean alarm limits
Select the high/low
alarm limits.
Mean alarms on Enable alarm when
limits are violated.
Diastolic alarm Select the high/low
limits
alarm limits.
Diastolic alarms on Enable alarm when
limits are violated.
Select Monitor Setup > Main Setup > Parameter Setup > Page 1 > Art 1 > Alarms > PR(Art 1)
Alarms to adjust the heart rate alarm default settings for the current patient.
UAC 1 pressure site default settings
The default P1 pressure site for the NICU software package is UAC. Select Monitor Setup >
Main Setup > Parameter Setup > Page 1 > UAC 1 > Setup > Page 1 or Page 2 to adjust these
settings for the current patient. The following table lists the factory default settings.
Setting
Label
Scale mmHg
Hemo Sweep Speed
Display Format
2094480-001
ED
Description
Description ED
(Adolescent, Pediatric, and Infant profiles: Enabled)
Description
Select the pressure site label.
Select the waveform scale.
Select the waveform display sweep
speed.
Select the pressure values display
format.
CARESCAPE ONE
ICU
Enabled
Disabled
AUTO
ICU
180/80
(Adolescent profile: 150/80; Pediatric profile:
130/70; Infant profile: 120/50)
Enabled
140/60
(Adolescent profile: 110/50; Pediatric profile:
100/50; Infant profile: 80/40)
Disabled
100/40
(Adolescent and Pediatric profiles: 80/40; In-
fant profile: 70/30)
Disabled
(Infant profile: 0-120)
Default settings
OR PACU
OR PACU
NICU
UAC
0-100
25 mm/s
Sys/Dia (Mean)
361