GE CARESCAPE ONE User Manual page 338

CARESCAPE ONE User Manual DRAFT 26 October 2017
Default settings
♦
♦
When Fem is selected as the channel label:
●
Catheter Disconnect: Enabled
￭
Display Format: Sys/Dia (Mean)
￭
Show Pulse Rate: Disabled
￭
Primary Arterial Source: AUTO
￭
Smart BP: Enabled
￭
Scale mmHg (waveform):
￭
♦
♦
When UAC is selected as the channel label:
●
Catheter Disconnect: Enabled
￭
Display Format: Sys/Dia (Mean)
￭
Show Pulse Rate: Disabled
￭
Primary Arterial Source: AUTO
￭
Scale mmHg (waveform):
￭
♦
♦
When CVP, FemV, RAP, UVC, P1, or P2 are selected as the channel label:
●
Scale mmHg (waveform):
￭
♦
♦
When ICP is selected as the channel label:
●
Scale mmHg (waveform):
￭
♦
♦
When LAP is selected as the channel label:
●
Scale mmHg (waveform) for all software packages: 0-20
￭
When PA or RVP is selected as the channel label:
●
Scale mmHg (waveform):
￭
♦
♦
Select Profile Settings > Invasive Pressures > Colors > Page 1 or Page 2 to define the invasive
pressures colors settings for labels. The following table lists the factory default settings.
Setting
Art
Fem
338
ED, ICU, OR, and PACU software packages: 0-200
NICU software package: 0-100
ED, ICU, OR, and PACU software packages: 0-200
NICU software package: 0-100
ED, ICU, OR, and PACU software packages: 0-120
NICU software package: 0-100
ED, ICU, OR, and PACU software packages: 0-20
NICU software package: 0-10
ED, ICU, OR, and PACU software packages: 0-30
NICU software package: 0-20
ED, ICU, OR, and PACU software packages: 0-60
NICU software package: 0-40
ED ICU
CARESCAPE ONE
NICU OR
Red
Red
PACU
2094480-001