GE CARESCAPE ONE User Manual page 357

CARESCAPE ONE User Manual DRAFT 26 October 2017
Setting Description
Saturation
Select the
Seconds saturation seconds
measurement
option. Nellcor
technology only.
Response
Select the averaging
time. Nellcor
technology only.
Sensitivity Select the sensitivity.
Masimo SET
technology only.
Select Monitor Setup > Main Setup > Parameter Setup > Page 1 > SpO2 > Alarms to adjust
these settings for the current patient. The following table lists the factory default settings.
Setting Description
SpO2 alarm
Select the high/low
limits alarm limits.
SpO2 alarms on Enable alarm when
limits are violated.
PR(SpO2) alarm
Select the high/low
limits alarm limits.
PR(SpO2) alarms Enable alarm when
on limits are violated.
2094480-001
ED
ICU
ED ICU
OFF/90 OFF/90
Neuro Trauma
and Infant profile:
profiles: 100/90
OFF/94
Neuro
profile:
OFF/94
Adoles-
cent, Pe-
diatric,
and Infant
profiles:
OFF/92
(OR software package Perfusion profile: Disabled)
150/50
Neuro profile: 120/50;
Pediatric profile: 170/70;
Infant profile: 180/80
(OR software package Perfusion profile: Disabled.)
CARESCAPE ONE
Default settings
NICU OR
10
Normal
Normal
NICU OR
100/88 OFF/90
Infant Neuro and Infant
profile: profiles: OFF/94
100/92
Enabled
200/90 160/40
Infant Neuro
profile: profile:
180/80 120/50;
Adolescent
profile:
150/50;
Pediatric
profile:
170/70;
Infant
profile:
180/80
Enabled
PACU
PACU
150/50
Neuro
profile:
120/50;
Pediatric
profile:
170/70;
Infant
profile:
180/80
357