Gdata Djde; Graphic Djde - Xerox DocuPrint 100 Software Manual

GDATA DJDE

Type
Syntax
Options
Option
offset
termination

GRAPHIC DJDE

Type
Syntax
Using LCDS Print Description Language
Using Dynamic Job Descriptor Entries (DJDEs)
Specifies the starting point of the graphic data from the
beginning of the user portion of a data record.
Record oriented
GDATA = offset, termination
Table 5-28. GDATA DJDE options and definitions
Definition
The starting point within the record of the graphic data that will be downloaded.
The terminating byte of the record. The options are:
• DEFAULT
– If online, a single terminating byte exists.
– If offline, no terminating byte exists.
• n: The number of terminating bytes that exist
Specifies that the DJDE is a graphic sentinel. That is, it
immediately precedes and identifies a graphic in the report data
stream.
NOTE: This DJDE, when specified, must be the only DJDE in its
packet.
Record oriented
GRAPHIC = (name, vpos [units], hpos [units], [,H] [,n [/d]] [,
(INKS, inkref [, inkref
1
(If no other DJDEs are specified, the parentheses may be
omitted.)
])])
2
5-39