Configuring Scan To Destination; Before You Begin; Configuring Default Scan Settings; Setting The Default Scan To View To Favorites - Xerox WorkCentre 7970 System Administrator Manual

Scanning

Configuring Scan To Destination

The Scan To Destination feature allows you to associate scan destinations with address book contacts.
Users can select these contacts when scanning using the Scan To feature.

Before You Begin

• Add at least one contact to the Device Address Book.
• Add scan destinations to address book contacts.
For details, see Address Books

Configuring Default Scan Settings

In CentreWare Internet Services, click Properties>Services.
1.
2. Click Scan To>Setup.
3. Edit settings as needed. For details, see the Help in CentreWare Internet Services.

Setting the Default Scan To View to Favorites

1. In CentreWare Internet Services, click Properties>Services.
Click Scan To>Setup.
2.
3. Click Address Book.
To configure the Device Address Book settings stored in the printer, click Edit.
4.
5. To set the default Scan To view at the control panel as Favorites, under Policies, select View
Favorites on Scan To Service Entry.
6. Click Apply.
®
182 Xerox WorkCentre
System Administrator Guide
on page 235.
®
7970 Multifunction Printer