Replacing The G430 Cover - Avaya 700457013 Job Aid

Job Aid: Installing the upgrade memory kit in the G450 / G430 Media Gateway

Replacing the G430 cover

ELECTROSTATIC ALERT:
Do not touch any components on the printed circuit board.
ELECTROSTATIC ALERT:
1. Place the G430 cover back on the unit.
2. Screw in the eight cover screws you previously removed. Their locations are indicated by
small arrows etched into the cover:
One screw on the top (see
●
Four screws on the right side (see
●
Three screws on the left side (see
●
3. Attach the mounting brackets to the G430, if applicable.
4. Replace the G430 in the rack or mount on the wall, if applicable.
5. Re-connect all cables (data and power) that you disconnected from the G430 and its media
modules, both front and rear.
6. Connect the G430 power cable into a mains socket.
7. Use the show platform mainboard CLI command to check the status of the G430 and
its memory module. For example, when the G430 is working properly, sample output
includes:
MAINBOARD BOARD
---------------
Type
Description
Serial Number
HW Vintage
HW Suffix
FW Version
Faults
RAM MEMORY SOCKET #1
--------------------
Type
Serial Number
Manufacture Part Num
Faults
10 Job Aid: Installing the upgrade memory kit in the G450 / G430 Media Gateway
Figure 4).
Figure 5).
Figure 6).
: G430 mainboard
: Avaya Inc., G430 Media Gateway
: 08IS26191011
: 1
: C
: 29.22.50
: No Fault Messages
: 512MB DDR SDRAM memory module
: 0b2c7605
: 64A6M64M8L-A06EWQU
: No Fault Messages