4
Circuit pack installation
Overview
Purpose
This chapter provides the procedures for initial seating of circuit packs in the shelf.
Contents
This chapter provides information on the following topics:
Initial circuit pack installation
Install PTM (pluggable transmission modules)
Tools, test equipment and accessories
Listed below are the required tools, test equipment and accessories.
Quantity
1
............................................................................................................................................................................................................................................................
365-372-403R5.1
Issue 1 November 2008
Required
Description
Y
ESD wrist strap
Comments
A wrist strap must be worn when handling
circuit packs. Use the electrostatic discharge
(ESD) jack provided on the shelf.
4-3
4-11
4 - 1