PTM installation
............................................................................................................................................................................................................................................................
Figure C-2 Module types
........................................................................................................................................................................................................................
4
Important! Pluggable optical modules are shipped with a dust plug installed into the
optical ports to maintain cleanliness during storage and/or transportation. It is
recommended that the dust plug be kept in place to maintain cleanliness until the optical
fiber is connected. With proper care and handling, cleaning the pluggable optical modules
should not be necessary.
........................................................................................................................................................................................................................
5
Referring to
If...
Type 1 or 2 Proceed to
Type 3
Type 4
........................................................................................................................................................................................................................
6
Before inserting the module, the latch must be in the closed position. With the dust plug in
place, the latch is in the closed position.
............................................................................................................................................................................................................................................................
C - 6
Step 3
determine which type of SFP is provided.
Then...
Step 9
Continue with
Step 6
Proceed to
Step 8
Install pluggable optics
365-372-403R5.1
Issue 1 November 2008