Table of Contents
Advertisement
Stand-alone installation testing
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
39
Login into the Alcatel-Lucent 1850 TSS-5 shelf using the RS-232 cable and the following
values;
Result:
........................................................................................................................................................................................................................
40
Enter user privilege mode by entering an "e" at the (ALU 1850TSS-5) prompt.
........................................................................................................................................................................................................................
41
Enter a <CR> at the password prompt.
Result:
........................................................................................................................................................................................................................
42
Enter the following CLI command to clear out the IP address; network protocol none.
........................................................................................................................................................................................................................
43
Enter the CLI command write memory to save these settings.
........................................................................................................................................................................................................................
44
Enter the CLI command show network.
Result:
echoed back. The IP address Subnet Mask and Default Gateway will be 0.0.0.0.
If nothing is echoed back, make sure you are logged in the privilege mode and a "#"
sign follows the prompt.
........................................................................................................................................................................................................................
45
If necessary restore the Network and Dial-up Connections window.
........................................................................................................................................................................................................................
46
Right-click on the LAN card being used.
........................................................................................................................................................................................................................
47
Select Properties.
............................................................................................................................................................................................................................................................
365-372-403R5.1
Issue 1 November 2008
Prompt
User:
Password:
The default system prompt (ALU 1850TSS-5) > will be echoed back.
The default system prompt (ALU 1850TSS-5)# will be echoed back.
The IP address, Subnet Mask, Default Gateway, MAC address, etc. will be
Local equipment and cross-connect tests
Value
Admin
blank
6 - 2 7
Advertisement
Table of Contents
