............................................................................................................................................................................................................................................................

Select Create a new cross-connection, and enter Next at the bottom of the screen.

Select Rate of the cross-connection (VC12); enter Next.

Select UPSR Ring Add/Drop and select Next.

Click on the Select button.

Select the "+" sign next to CP main-1 (STM-N) where N is equal to STM1 or STM4.

Select Port 1 (STM-N).

Result:

Select the "+" sign next to the first TUG-3.

Select TUG-2 1-1.

Highlight an available tributary on the right hand side (m-1-1-1-1) and click on Select.

Click Next.

Select the E1 to drop to, (B). Choose an available trib from the "A" function group TUG-2

Port 1-1 (E1)1 (a-1-1-1),

Highlight an available tributary on the right hand side (a-1-1-1) and click on Select.

Click Next.

6 - 1 4

A window appears with either 3 TUG-3 s or 12 TUG-3s.

Local equipment and cross-connect tests

Issue 1 November 2008

365-372-403R5.1

Table of Contents

Alcatel-Lucent 1850 Installation And System Turn-Up Manual page 140

Related Manuals for Alcatel-Lucent 1850

Related Products for Alcatel-Lucent 1850

Table of Contents