Table of Contents
Advertisement
Stand-alone installation tests
............................................................................................................................................................................................................................................................
Section and Chapter
Tools, test equipment and accessories
Listed below are the required tools, test equipment and accessories.
Quantity
1
1
............................................................................................................................................................................................................................................................
II - 2
Procedure
"Clearing alarms" (p. 6-8)
"DS1 testing procedure" (p. 6-10)
"E1 testing procedure" (p. 6-13)
"DS3/E3 testing procedure" (p. 6-17)
"VLNC35 standalone test" (p. 6-21)
"VLNC40/VLNC42 standalone test" (p. 6-22)
"VLNC60/61 standalone test" (p. 6-28)
"VLNC64 standalone test" (p. 6-31)
"LED test" (p. 6-34)
"Office alarm test" (p. 6-35)
"Miscellaneous (environmental) discrete
telemetry test" (p. 6-38)
"Final operations" (p. 6-41)
Required
Description
Y
Personal Computer
(PC)
Y
CIT Interface Cable
(848748869)
LAN 10BASE-T
(Crossover)
LAN 10BASE-T
(StraightThrough)
Required
Yes
Yes
Comments
See
""PC minimum requirements for
®
WaveStar
CIT installation" (p.
below.
8-ft. long RJ45 to 9-pin D-sub serial cable.
Allows for direct connection between the
PC LAN card and the CTL LAN slot. See
Table 3-19, "Ethernet / LAN crossover
cable" (p. 3-35)
for Comcode information.
Allows for connection between the PC
NIC card and a HUB. See
"LAN cross-over cable connections"
(p. 3-35)
for Comcode information.
Completed
Yes
No
4-4)"
Table 3-20,
365-372-403R5.1
Issue 1 November 2008
Advertisement
Table of Contents
