Vlnc40/42 Default Rs-232 Settings - Alcatel-Lucent 1850 Installation And System Turn-Up Manual

Stand-alone installation testing
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
2
Connect the other end of the RS-232 cable to the PC. see
assembly" (p.
........................................................................................................................................................................................................................
3
Launch a Hyper Terminal session from the PC. Start -> Programs -> Accessories ->
Communications -> Hyper Terminal.
Result:
........................................................................................................................................................................................................................
4
Enter a name in the window and click OK.
........................................................................................................................................................................................................................
5
If using COM1 on the PC, click OK; otherwise, connect using COM2.
........................................................................................................................................................................................................................
6
Click OK.
........................................................................................................................................................................................................................
7
The default settings are as follows:
Table 6-4 VLNC40/42 default RS-232 settings
........................................................................................................................................................................................................................
8
Click OK.
Result:
........................................................................................................................................................................................................................
9
Enter a <CR> return.
Result:
............................................................................................................................................................................................................................................................
365-372-403R5.1
Issue 1 November 2008
3-32).
A Connection Window opens.
Value
9600
8
None
1
None
A Hyper Terminal Window will open.
A "User:" prompt will be echoed back.
Local equipment and cross-connect tests
Chapter
Description
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
3, "RS-232 cable
6 - 2 3