PTM installation
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
11
Insert the pluggable optical module in the required socket of the circuit pack faceplate.
Confirm that the optical module is locked in the socket. Verify that all unused sockets on
the circuit pack are equipped with dust covers.
Figure C-5 Insert optical module into socket
Result:
installation.
If response is not correct, replace the optical module. If the optical module fails when
inserted, and another optical module in the shelf fails at the same time, replace the
newly-installed optical module. Each optical module has unique internal data for
warranty purposes. If this data for any reason is not unique, both optical modules with
............................................................................................................................................................................................................................................................
C - 8
The port appears in the WaveStar
®
CIT System View indicating successful
Install pluggable optics
365-372-403R5.1
Issue 1 November 2008