............................................................................................................................................................................................................................................................

the duplicated information will be declared failed. Refer to the Alcatel-Lucent 1850

Transport Service Switch (TSS-5) Alarm Messages and Trouble Clearing Guide, 365-

372-302.

Push on the dust plug to insert the module. The latch automatically catches when the

module is inserted. The module is secure.

If installing a pluggable

optical module in an...

Optical OLIU circuit pack,

Ethernet circuit pack,

To test the OC-n optical port on installed OLIU circuit packs, loop back the OC-n optical

port on itself (OUT to IN) with a 15-dB Attenuator.

Result:

Remove the light guide jumper used to loop back the OC-n optical port and the LBO.

Result:

SYSCTL circuit pack.

From the System View window, select Configuration -> Update System -> Update All.

Result:

Repeat

If all SFP modules are installed, then from the System View menu click on the Alarm List

button to verify that no alarms are present for the SFP ports just installed on the circuit

packs.

N D

........................................................................................................................................................

365-372-403R5.1

Issue 1 November 2008

No alarms on the OLIU.

The port LED starts flashing. The MN and NE LEDs are lighted on the

The port LED stops flashing. All alarms are cleared.

Step 1

Step 16

for additional SFP modules.

T E P S

Then...

Continue with

Step

14.

Proceed to

Step

18.

Install pluggable optics

C - 9

Table of Contents

Alcatel-Lucent 1850 Installation And System Turn-Up Manual page 219

Related Manuals for Alcatel-Lucent 1850

Related Products for Alcatel-Lucent 1850

Table of Contents