Table of Contents
Advertisement
06 Presser Foot Motor
Test
08 System Output Test
09 Panel Test
11 Main motor origin
adjustment
3） During the function test, if user presses
will return to the status of step 2); however, if the aging mode has been used once, the aging mode can't be
released unless the power supply is shut off.
2.3.1 01 System Input Test
2.3.1 01 System Input Test
1)
This function is used to test the input status of panel
keys, pedal switch and various sensors. Select "01
System Input Test" and press
2)
Under this mode, press
item and the status of the test signal is displayed at
the right side of the screen.
2.3.2 02 XY Origin Adjustment
2.3.2 02 XY Origin Adjustment
This function is to display the inching operation, origin searching operation and the status of X/Y origin sensor
of X/Y motor.
1)
XY Motor Single Step Running Test
If after machine start, user has never pressed
key to enter ready status but rather directly pressed
key to enter system test mode, enter "02 XY
Origin Adjustment" and then user can directly press
key and
by step respectively. If user has ever pressed
key to enter ready status after machine start, every
time user enters "02 XY Origin Adjustment" mode,
user need press
before moving motor step by step. Under this
situation, this item indicates XY motor origin
adjustment function.
Presser foot, thread-trimming
motor/origin sensor test
Output signal test
LED and LCD test
Corrects the spindle origin
position
key or
key to enter.
key to change test
key to move XY motors step
key to search XY origin
rotation number.
Display inching operation of presser foot and thread-trimming
motor, origin searching operation and the status of presser foot
origin/presser foot sensor.
Drive the movement of output solenoid/air valve.
Test the status of panel displayer and LED light.
The origin position of the spindle motor can be corrected
according to the mechanical assembly error
key, the test will be terminated and the system
62
– 7 –
Advertisement
Table of Contents
