Threading; Threading Preparation / Tips; Thread Guide Bar; Thread Tension - JUKI MCS-1800 Instruction Manual

Threading

Threading preparation / TIPS

・Switch the machine off (power switch "0").
・ Fully raise support rod with thread guide.
・ Open the looper cover and cloth plate.
・ Turn handwheel until the looper is at its leftmost position.
・ Raise the presser foot to release the tensions.
・ Thread the looper first and then the needle(s).

Thread guide bar

Slide thread into the two slits to form an S-loop.

Thread tension

The thread must lie correctly between the tension discs
for perfect stitch formation. When a slight resistance is
felt on the thread, it is lying correctly between the tension
discs.
12